Technical details
1- Ribbon holder
Easy insertion of the ribbons is enabled with the three-part tightening axles. A preprinted ruler simplifies the adjustment.
2- Roll holder
When setting the margin stop, the material roll is automatically centered. If rolls with 100 mm core diameter are processed, an adapter is recommended.
3- Plungers
Both plungers are fixed for all material widths. No print head settings or adjustments are necessary.
4- Antistatic brush
Particularly with plastic materials the electrostatic charge is discharged after printing.
5- Separator
At high heat energy the ribbon can stick with the textile tape. A roller reliably separates the material from the ribbon.
6- Material guide
The material guide just in front of the print roller provides accurate imprint. The material width is adjusted with a spindle.
Slim print rollers
To achieve accurate imprint with slim materials and ribbons slim print rollers are needed. These prevent from print roller wear, print head contamination and errors during material feed. Coating: synthetic rubber
Operation panel
Intuitive and easy operation with self-explanatory symbols to configure the device setups
1- LED signal: Power ON
2- Status bar: Data reception, Record data stream, Ribbon warning, SD memory card/USB memory stick plugged in, Bluetooth, WLAN, Ethernet, USB Slave, Time
3- Printer status: Ready, Pause, Number of printed labels per print job, Label in peel-off position, Awaiting external start signal
4- Periphery buttons:
Cutter/perforation cutter: direct cutting
External rewinder: winding outside or inside
Tear-off or peel-off mode: print the next label
Applicator: label application
5- Operation
Jump to menu
Reprint last label
Interrupt and continue print job
Stop and delete all print jobs
Label feed
6- USB slot for the Service Key or a memory stick, to load data in the IFFS storage
7- USB-WLAN-Stick 2.4 GHz 802.11b/g/n included as an extra item in the scope of delivery;
In hotspot mode it is possible to directly connect a mobile device with the printer via WLAN.
» Termal transfer ve direkt termal yazıcı.
» 300 mm/sn (600 dpi'da 150 mm/sn) baskı hızı.
» 300 dpi baskı çözünürlüğü.
» 600 dpi baskı kafa seçenekleri.
» 105.7 mm baskı genişliği.
» Outside ve inside ribon kullanabilme.
» 256 MB Ram, 50 MB IFSS.
» 512 MB SD Kart desteği (SDHC,SDXC)
» USB 2.0, seri port, 10/100 Base ethernet, 2 x Usb bağlantısı.
» Standart WLAN 802.11b/g bağlantısı.
» 205 mm. Çapında etiket haznesi.
» Pc`den bağımsız çalışabilme özelliği.
» Geniş Renkli Dokunmatik LCD Ekran.
» Tekstil Etiketleri için geliştirilmiş Özel bar.
» 2 Yıl garanti.
SQUIX
Katalog English PDF
SQUIX
Kullanım Kılavuzu Türkçe PDF
SQUIX
AB Uygunluk Belgesi Türkçe PDF
cab Linux x86 - 32 Bit Driver
CUPS Linux Intel 32bit Driver (min. CUPS 1.2)
cab Linux x86 - 64 Bit Driver
CUPS Linux Intel/AMD 64bit Driver (min. CUPS 1.2)
cab MAC OS X Driver
Apple® Mac OS X 10.6 up to 10.11
cab Windows Driver
32/64 Bit (Vista - Windows 7 - Windows 8 - Windows 8.1 - Windows 10 - Windows Server 2008, 2008 R2, 2012, 2012 R2, 2016) CERTIFIED
cablabel S3 Lite (Free)
Windows Vista, 7, 8, 10, Server 2008, 2008 R2, 2012, 2012 R2
cablabel S3 Pro
Windows Vista, 7, 8, 10, Server 2008, 2008 R2, 2012, 2012 R2
cablabel S3 Demo (Free)
Windows Vista, 7, 8, 10, Server 2008, 2008 R2, 2012, 2012 R2