Printing method
|
Thermal transfer, Direct thermal
|
Printable resolution dpi
|
203 / 300 Dpi
|
Print width up to mm
|
203 dpi / 108 mm – 300 dpi / 105,7 mm
|
Print speed up to mm/s
|
203 dpi / 150 mm/s – 300dpi / 150 mm/s
|
Ribbon / Ink side
|
Outside or inside
|
Ribbon / Variable length up to m
|
360m
|
Printer size and weights
|
264 x 245 x 412 mm
|
Printer Weight kg
|
4,0 kg
|
Main storage (RAM) / Data storage (IFFS)
|
256MB / 50MB
|
Interfaces
|
R232C, USB for PC connection, Ethernet
|
Power supply
|
100 – 240 VAC, 50/60 Hz, PFC
|
Printing method
|
Thermal transfer, Direct thermal
|
Printable resolution dpi
|
203 / 300 Dpi
|
Print width up to mm
|
203 dpi / 108 mm – 300 dpi / 105,7 mm
|
Print speed up to mm/s
|
203 dpi / 150 mm/s – 300dpi / 150 mm/s
|
Ribbon / Ink side
|
Outside or inside
|
Ribbon / Variable length up to m
|
360m
|
Printer size and weights
|
264 x 245 x 412 mm
|
Printer Weight kg
|
4,0 kg
|
Main storage (RAM) / Data storage (IFFS)
|
256MB / 50MB
|
Interfaces
|
R232C, USB for PC connection, Ethernet
|
Power supply
|
100 – 240 VAC, 50/60 Hz, PFC
|
DR4-25
DR4-50
To achieve accurate imprint with slim materials and ribbons, slim print rollers are needed. These prevent from print roller wear, print head contamination and errors during material feed.
1 Roll holder
The label roll is inserted and automatically centered when closing.
2 Ribbon holder
The stop can be adjusted according to the ribbon width.
3 Print head 203 / 300 dpi
In case of cleaning or wear, the print head can be replaced easily by hand without tools.
4 Label sensor - gap oder reflective
The sensor position can be adjusted via a spindle using the red rotary knob. The chosen position is indicated by a LED.
5 Print roller DR4
In case of cleaning or wear, the print roller can be replaced without tools.
6 Material guide
Using the rotary knob, the guides can be adjusted to the material width
7 Tear-off plate
made of thin sheet steel; jagged, so labels are cleanly separated
Operation panel
Intuitive and easy operation with self-explanatory symbols to configure the device setups
1 LED signal: Power ON
2 Status bar: Data reception, Record data stream, Ribbon pre-warning, SD memory card / USB memory stick, Bluetooth, WLAN, Ethernet, USB slave, Time
3 Printer status: Ready, Pause, Number of printed labels per print job, Label in peel-off position, Awaiting external start signal
4 Buttons
for cutter / perforation cutter: direct cutting tear-off mode: print the next label
5 USB slot for the Service Key or a memory stick, to load data in the IFFS storage
6 Operation:
Jump to menu
Reprint last label
Interrupt and continue print job
Stop and delete all print jobs
Label feed
cab Linux x86 - 32 Bit Driver
CUPS Linux Intel 32bit Driver (min. CUPS 1.2)
cab Linux x86 - 64 Bit Driver
CUPS Linux Intel/AMD 64bit Driver (min. CUPS 1.2)
cab MAC OS X Driver
Apple® Mac OS X 10.6 up to 10.11
cab Windows Driver
32/64 Bit (Vista - Windows 7 - Windows 8 - Windows 8.1 - Windows 10 - Windows Server 2008, 2008 R2, 2012, 2012 R2, 2016) CERTIFIED
cablabel S3 Lite (Free)
Windows Vista, 7, 8, 10, Server 2008, 2008 R2, 2012, 2012 R2
cablabel S3 Pro
Windows Vista, 7, 8, 10, Server 2008, 2008 R2, 2012, 2012 R2
cablabel S3 Demo (Free)
Windows Vista, 7, 8, 10, Server 2008, 2008 R2, 2012, 2012 R2